St. Patrick’s Day Nails

I’m still recovering from St. Patrick’s Day, how about you?  Sorry for the late post, but you’ll have this tutorial ready for the next time you want to show some Irish pride!

It’s been awhile since I tried doing any kind of water marbling, and I felt like maybe I could make a nice cloverleaf pattern by using that technique.  I can’t stand the mess of cleaning up my nails with the tradition dunking method associated with water marbling, so I tried making decals this time around, which worked great.

I chose a nice assortment of green nail polishes for the marbling, and I threw in a glittery gold polish for good luck.

img_20160319_115248.jpg

Finger Paints Nail Color works exceptionally well for water marbling. From left to right: Masked Beauty, Monet Money, Peace, Love & Green, and Grassy Knoll.

To make the decals, I used a small plastic cap to hold the water and dropped in my colors one at a time.  Because my cap has a 1.5 inch diameter, it doesn’t take many rings to get the colors nicely packed.

img_20160319_115426.jpg

I work on a miniature scale. It takes only 12 drops of polish to get this bullseye to form.

I used a toothpick to bring the outside rings of the bullseye to a point in the middle.

img_20160320_191720.jpg

Not my most perfect water marble, but I repeated these steps a few times so I could pick and choose which decals looked the best.

I blew on the surface of the water to help the polish dry a little more before picking up the image with a large stamper.

img_20160319_115543.jpg

You can choose to stamp this directly onto your nails, but I set my stamper aside to allow the polish to dry to turn this into a nail decal.

After waiting a few minutes, the water marbled polish is ready to be peeled off the stamper head.  If it doesn’t lift easily, allow the polish to dry some more.  Having multiple stampers makes this process easy because as one decal is drying, you can make another water marble pattern to be picked up with a different stamper.

img_20160319_115708.jpg

After allowing the polish to dry, you should be able to peel off the layer. In this way, you can pick the best looking part of the pattern to use on your nail without making any mess.

I made several decals, although I only needed four of them in the end.

The process for the application is fairly easy.  I cut out the portion of the decal that I wanted to use and trimmed it to fit my nail.

img_20160319_120151.jpg

I do a rough cut of the decal before I trim it down to fit my nail.

I used White Hot by Sephora by OPI as a base color under the water marble.  I only used one coat of polish, and it doesn’t have to be opaque because the water marble will cover it up.  White helps the colors pop.

img_20160319_115855.jpg

One coat of White Hot by Sephora by OPI.

While the polish is still tacky, apply your decal and set it with clear top coat.

img_20160319_135518.jpg

I put the water marble design on my middle and ring fingers to form the shape of a cloverleaf.

img_20160319_115027.jpg

Extra supplies for part 2: White Hot by Sephora by OPI, Kiss Nail Art Paint in Black, and Recollections Signature Glitter in Emerald.

I really wanted sparkly green nails, but I don’t own a green glitter polish, so I made my own with the following steps.

img_20160319_135950.jpg

I painted my nail with Monet Money from Finger Paints.

While the polish was still wet, I poured on green glitter.  I used a fan brush to sweep away the excess.

img_20160319_140230.jpg

Emerald glitter made by Recollections.

I then took Sally Hansen Miracle Gel Top Coat and brushed on about 2-3 coats over the glitter so that it formed a smooth surface.  I wouldn’t have minded having some texture, but I wanted to paint belt buckles on top of the glitter.

img_20160319_140619.jpg

Sparkly emerald green nails!

To form the belt, I used the striping brush from Kiss Nail Art Paint in Black to make two parallel lines and filled in the section.

wp-1458411227729.jpg

My glitter just got black barred.

Using a detail brush and Masked Beauty, I painted a thin gold line above and below the black section and connected them to form the square buckle.

img_20160317_020053.jpg

Add some top coat, and you’re done!

It took awhile to finish this, but I love the results.

img_20160317_020249.jpg

Happy St. Patty’s Day!

May the luck of the Irish be with you!  Happy polishing!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s