Today I’m stepping out of my comfort zone and trying a different technique with something I’ve never been great at using: nail foil. Anyone who has experience with it knows that it can be temperamental to use, and even when you get the application right, the wrong top coat can ruin the whole thing and make it look as if it was never there. Yet here I am testing my patience with this material. Off we go!
To start, I painted all my nails black.
This is stamping polish from b.m.c. nail lacquer in noir black. Not sure why it looks textured though- it might be the pigments.
To make the decals, you will need a plastic bag or a silicone mat. I used the Lotus Mat from Bundle Monster for mine. Start by applying swatches of top coat onto your chosen surface. The top coat will serve as the base of your decal. Wait for your top coat to fully dry before you proceed to the next step.
Next, choose a pattern that you want to stamp and transfer it to a swatch of top coat. You must act very quickly to apply a piece of nail foil over the stamped area so that the foil can adhere to the wet polish. Rub over the piece of foil with your finger, then lift the foil quickly, and you should be left with a cool foil embossed pattern.
For this manicure, I used the pattern in the lower right hand corner of plate BP-L059 from Born Pretty.
The stamping polish used was the same b.m.c. nail lacquer in noir black from my base color. I did this so that it would not look obvious if the foil did not transfer fully.
The foil was purchased in a large lot from an eBay seller, and there is no brand associated with it. You can see that the foil that I chose to use has a natural rainbow gradient effect, so it happens to match the levels that you would see on an equalizer. In case you don’t know what an equalizer looks like, here’s an example:
Very 80s techno chic.
At this point you can gently peel the decals off the mat and cut them to fit your nails. In order to hide some of the transfer imperfections, I also re-cut the levels of the bars. You can apply a cut decal by painting another layer of black polish or some top coat onto your nail and then gently press the decal onto the wet surface.
You can see where I cut the levels of the bars for the decals, but they more or less stick to the base color. This look reminds me of Tetris.
Disclaimer: Because I didn’t like the finish of the b.m.c. nail lacquer as a base color, I applied the decals using What’s A Tire Jack? from Sephora by OPI.
It’s easy to say just apply top coat to seal in everything, but here’s where things can get tricky. I’ve heard that a water based top coat works best with foil, but I don’t have any. I also know that pretty much anything that is branded as “fast drying” will cause the foil to shrink and/or break up. If you don’t use a top coat at all, the foil will quickly rub off on its own. I took a chance by using my Ya Qin An top coat, seeing as it never smears nail art, and it worked pretty well. Thumbs up for Ya Qin An!
Nail foil success! Too bad this took forever to do.
Fun fact: I’m holding a record that I actually played on! It was for a private project, but it’s still cool as a collector’s item.
In any case, I love how I conquered my fear of nail foil. That’s not to say that I don’t curse a lot when things don’t work out the right way, but at least I know that I have another technique that I can use. Maybe practice does make perfect!