Back to School: Crayon Nail Art

It’s almost time for kids and teachers to go back to school (at least in NYC- I know some people are already back), so I wanted to do some fun nail art to celebrate mark the change of season.  School supply shopping was always one of my favorite activities, and trying to convince my parents to get me the biggest box of crayons was high on the list.  I’ll settle for mostly primary colors for this mani, though.  😉

First off, the color selection:

wpid-img_20150828_225121.jpg

My mini rainbow, left to right: Sephora by OPI- What’s a Tire Jack?, Nicka K- NY139, Sephora Nail Lacquer 5 Day Shine- Banana split, Essie- Pretty Edgy, Formula X for Sephora- Omni, Formula X for Sephora- Haphazard.

I started off by painting each of my nails a different color.  I went in backwards rainbow order.  Don’t ask why- I think I had a sixth sense about something…

wpid-img_20150828_232754.jpg

Taste the rainbow!

The toughest part about this mani was having to do the squiggly line detail.  Trying to paint over black polish with a lighter color would be near impossible, and I hate having to clean nail polish off my nail art brushes.  My approach was to take black acrylic paint and draw around the squiggle so that the original base color showed through.

Step 1- Use a striping brush to paint the outline of the area where the squiggle will appear.

wpid-img_20150828_232836.jpg

Painting the outlines of the black section of the crayon wrapper will allow you to space your squiggles out more consistently in the next step.

For the next two steps, please refer to the photo below Step 3.

Step 2 (on green nail): Using a detail brush, paint in hills along one line. If you like more of a uniform look, put the highest peak of the hill in the center of your nail and then finish off the sides with an upward curve.

Step 3 (on yellow nail): repeat the process of painting hills along the other line to coincide with the opposing curve.

wpid-img_20150828_232916.jpg

The various stages of painting in the squiggle shape within the black lines.

For an easier mani, you can simply topcoat the result and say that you painted the bottom half of the crayon, but I like to go the distance.  😉

In order to make the wrapper look different from the actual crayon, I used matte top coat over the bottom half of my nails.

wpid-img_20150828_233011.jpg

Mattifying the squiggle section of the nail mimics the paper wrapper and gives the look more texture. I used a matte top coat from Sephora by OPI.

To draw the tip, I used a striping brush and black polish to first notch the beginning of the tapered section of the point.

wpid-img_20150828_233109.jpg

Adding notches to show the start of the tip of the crayon.

From there I painted in an angled section with the striper so that the tip of the crayon would be tapered.

wpid-img_20150828_233153.jpg

Crayon madness!

Add some topcoat to the top half of the nail, and you’re done!  It’s a very cute look and makes people nostalgic for their youth.  Now where did I put that coloring book?  😉

If you were wondering about that sixth sense that I mentioned before…  It’s because the purple color ended up being a lot darker than I thought it would be, so the black detail did not show up very well at all.  😦  I’m glad I didn’t have to photograph my thumb to get a good picture!  If you decide to recreate this, definitely choose lighter colors over darker ones.

Happy polishing!

Water Marbling Comb Review

When I saw that Born Pretty Store had a water marbling comb on their website, I was intrigued and wanted to try it out.  I’ve always been frustrated with water marbling because of how inconsistent and time consuming the process can be, so the comb seemed like an interesting way to get a water marbled effect without having to use water.

The comb came packaged in a plastic resealable bag as shown below.  There is no brand name associated with it, although it might be written in Chinese on the label.  If anyone knows what the translation is, please feel free to comment the answer on this post.

wpid-img_20150805_215850.jpg

Water marbling comb from Born Pretty Store.

The comb was bigger than I thought it would be.  The metal spikes span the width of 2.25 inches and are 2.5 inches long, and the spikes are set apart from each other in a plastic handle at 0.5 cm intervals.  The size makes the comb easy to hold and handle, although I think the spikes are too long for the way I’ll be using this.  I’m guessing that if you use this in water for large scale real water marbling, the length will serve you well, but for nail art, there’s no way you would be using a container big enough to accommodate this comb.

wpid-img_20150805_215948.jpg

Size perspective against US quarters.

It should be noted that the spikes have slightly tapered but blunt ends.  You shouldn’t be in any danger of hurting yourself on the points, but I’m not going to say that it’s impossible!

I also noticed that the length of the spikes is fairly consistent but not 100% even with each other.  Again, if you were to use this with water for water marbling, this would be of no importance, but for dry water marbling, it’s going to mean that the points won’t touch the surface of the polish evenly.

wpid-img_20150805_225941.jpg

Look closely, and you’ll notice that the points don’t form a completely straight line. The 2nd spike from the bottom in particular is shorter compared to the spikes above and below it.

So how do you use this thing?  There aren’t any instructions that come with it, so I decided to wing it.

It’s possible to make nail decals on your own by painting polish on top of plastic wrap, so I took a piece of plastic (Saran) wrap and stretched it over a binder.  You can also use a Ziploc bag or other similar smooth surface.

wpid-img_20150805_220127.jpg

Not just any old binder- it’s a binder with a piece of plastic wrap taped over its surface.

Next comes the fun part: experimenting with polish and combing through it.  🙂

I painted generous stripes of polish next to each other on the plastic wrap.  You don’t want to have space in between the stripes, but you probably don’t want to contaminate your brushes with the color of the stripe that is next to it either.  You can simply wipe your brush on a paper towel until the original color is the only one you see before dipping it back into the bottle.

wpid-img_20150805_230137.jpg

About to comb through some stripes. Left to right the colors are Nellie from Julep, Mai Tai from nailtini, Life Gave Me Lemons from OPI, Hot Fun in the Summer-Lime from OPI, Zing from Formula X for Sephora, and Haphazard from Formula X for Sephora.

After stroking through the polish from left to right, this is what the pattern looked like:

wpid-img_20150805_230344.jpg

Dry water marble stroking the comb from left to right.

It’s a pretty effect, but it should be noted that because of the unevenness of the spikes, the polish completely scraped away in some areas while that short spike I mentioned before hardly touched the surface of the polish.

After wiping the comb clean with a paper towel, I decided to comb through the polish going from right to left, fitting the spikes in between the pooled purple sections.

wpid-img_20150805_230523.jpg

Polish combed through in both directions.

I love the effect, but you also have to remember that not too many people have nails that are big enough to fit the entire pattern on them!  So from this I was inspired to use just 2 different colors to make a flame pattern.

wpid-img_20150805_220429.jpg

Stroking left to right with the comb through stripes of Mai Tai by nailtini and Life Gave Me Lemons by OPI.

wpid-img_20150805_220844.jpg

Stroking right to left to make flames.

I repeated this process a few different times on different areas of the plastic wrap so that I would have enough sections to cover my nails.  I also painted clear topcoat over these patches in order to facilitate removal of the pieces.  The thicker the coats of polish, the easier the sections will lift from the plastic wrap.  I allowed everything to dry overnight so that the next day, I was able to lift up these marbled sections easily.

wpid-img_20150805_221143.jpg

Lifting up the marbled pattern from the plastic wrap.

From here, I cut the pieces of dried polish into shapes that would fit my nails and adhered them by applying each decal one at a time.  I painted a base color first, positioning the decal on top of the wet polish, and then applied more topcoat to the decal to make it pliable.  I used an orange stick to push the decal down evenly across my nail bed.  You can see more of this process in my Flaming Nail Art post.

The resulting mani was pretty cool, and I didn’t even need water to get the marbled effect!

wpid-img_20150805_223930.jpg

These nails are on fire!

My overall impression is that the comb is pretty handy for making marbled nail decals in advance and that it is a fun tool to play with.  It’s extremely easy to clean the comb with just a paper towel, but the unevenness of the spike lengths negate the usefulness of having a wide comb.  Technically you could use a toothpick to create the same effect line by line, but it would be more time consuming.  But if you like having relatively uniform looking marbled patterns, this is a great way to get a consistent look across your nails.

Diamond rating: ♦♦♦♦◊ (4/5)

If you are interested in purchasing this water marbling comb (retail price is $6.99 USD), the link for the item is shown below.  Using code RSSPX31 will get you 10% off your order, and Born Pretty Store offers free worldwide shipping.  Happy polishing!

http://www.bornprettystore.com/nail-water-marbling-comb-practical-marbling-comb-nail-tools-p-20690.html

http://www.bornprettystore.com/

rsspx31